• £0.00 GBP
    0

 

Prices Include VAT
Same Day Despatch of Stock Items
Free Shipping of Orders Over £200
Quality + Value

50mm Sunwood Screw-Down Glazing Bar

50mm powder-coated aluminium Rafter Main Glazing Bar and Cover Cap with rubber Base Gasket and screws. Great retro-fit capping for 2 inch spars.
Price :
£29.92
GBP

* Required Fields

£29.92

Details

50mm Main Glazing Bar from Sunwood

Various lengths in Brown or White finish

Screw-Down Rafter Gasket with Aluminium Cap

Part of the high quality, maintenance-free, Sunwood Timber Glazing System. Attractive and strong aluminium extrusion with tough powder-coated finish and long-lasting EPDM rubber gaskets.

Retro-fitted to 2" rafters on existing 5-40° pitched timber roofs, the 50mm Rafter Main Bar and other Sunwood components can encase and seal problem leak areas while also breathing a new lease of life into the roof. Sunwood is equally effective on new instalations too, offering an attractive, low-maintenance, long-life capping solution.

Sunwood Screw-Down 50mm Rafter Main Bar Dimensions

This Screw-Down rafter bar includes powder-coated aluminium 50mm Rafter Main Bar Top Cap with detachable Cover Cap to conseal and protect fixings. Rafter Main Bar incorporates integrated High Side EPDM Rubber Gasket for water-tight seal against top side of glazing and a separate EPDM Base Gasket (with removable central pip) that is fixed to timber rafter to act as a seat and seal on underside of glazing.

Features & Benefits

  • Any Glazing - use with glass or polycarbonate, from 10mm and beyond
  • High Side EPDM Gaskets - compreses onto glazing for weather-proof seal
  • EPDM Base Gasket - acts as a seat and seal for glazing
  • Removable Central Pip - use with grooved or non-grooved rafters
  • Strong and lightweight - quality aluminium extrusion
  • Quality Powder-Coating - durable, consistent finish
  • Fixings Included - supplied with stainless steel screws
  • Flexible System - fits many roof designs and sizes
  • Fully-Serviceable - Sunwood components can be easily removed if required
  • Maintenance-Free - no annual painting required
  • Designed to Integrate - neatly fits other Sunwood products
  • Easy-Fit System - designed to ease installation
  • 5 Year Guarantee - long product guarantee

Technical Information

Finishes Powder-coated White or Brown
Material Aluminium extrusion (Main Bar Top Cap and Cover Cap)
EPDM rubber (High Side Gaskets and Base Gasket)
Top Cap Width 50mm
Top Cap Height 12.73mm (excl. High Side Gasket)
Base Gasket Width 50mm
Base Gasket Height 8mm (uncompressed and including pip)
Available Lengths 3m, 4m, 5m and 6m

Fitting the Sunwood Screw-Down 50mm Rafter Main Bar

Base Gaskets should be fitted to timber rafter. If timbers do not have a 3mm groove, then the central Pip that runs down the underside of the Base Gasket can be removed. Base Gasket should be cut to a length that allows it to over hand the gutter and fixed to the rafter with staples or similar. End Caps should be fitted and Main Bars cut to length. Main Bars can then be screwed down at 300mm intervals onto the timber rafters to form a nice tight seal of High Side EPDM Gasket onto the roof material. It is vital that the Main Bar Top Cap sits on the Sunwood Ridge’s Flipper Seal and that the Main Bar Cover Cap is fitted and is covered by the Ridge. The Cover Cap is easy to fit using the two cover cap locators that run parallel down the length of the Main Bar - just hook the Cover Cap over one cover cap locators and pivot down onto other for a tigh snap fit.

The above is a summary only and not intended as comprehensive fitting instructions.

Additional Information

Material Aluminium
Manufacturer Part Number T50RM3BS
Guarantee No
Colour Brown
Range Screw-Down
Brand Sunwood
Further Detail No
Lisitng Install Guide

Fitting the Sunwood Screw-Down 50mm Rafter Main Bar

Base Gaskets should be fitted to timber rafter. If timbers do not have a 3mm groove, then the central Pip that runs down the underside of the Base Gasket can be removed. Base Gasket should be cut to a length that allows it to over hand the gutter and fixed to the rafter with staples or similar. End Caps should be fitted and Main Bars cut to length. Main Bars can then be screwed down at 300mm intervals onto the timber rafters to form a nice tight seal of High Side EPDM Gasket onto the roof material. It is vital that the Main Bar Top Cap sits on the Sunwood Ridge’s Flipper Seal and that the Main Bar Cover Cap is fitted and is covered by the Ridge. The Cover Cap is easy to fit using the two cover cap locators that run parallel down the length of the Main Bar - just hook the Cover Cap over one cover cap locators and pivot down onto other for a tigh snap fit.

The above is a summary only and not intended as comprehensive fitting instructions.

Lisitng Pack Contents No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Fitting the Sunwood Screw-Down 50mm Rafter Main Bar

Base Gaskets should be fitted to timber rafter. If timbers do not have a 3mm groove, then the central Pip that runs down the underside of the Base Gasket can be removed. Base Gasket should be cut to a length that allows it to over hand the gutter and fixed to the rafter with staples or similar. End Caps should be fitted and Main Bars cut to length. Main Bars can then be screwed down at 300mm intervals onto the timber rafters to form a nice tight seal of High Side EPDM Gasket onto the roof material. It is vital that the Main Bar Top Cap sits on the Sunwood Ridge’s Flipper Seal and that the Main Bar Cover Cap is fitted and is covered by the Ridge. The Cover Cap is easy to fit using the two cover cap locators that run parallel down the length of the Main Bar - just hook the Cover Cap over one cover cap locators and pivot down onto other for a tigh snap fit.

The above is a summary only and not intended as comprehensive fitting instructions.

Downloads

This tab will contain downloadable material about 50mm Sunwood Screw-Down Glazing Bar, such as PDF fitting guides that we or the product manufacturer has produced.

UPSELL PRODUCT(S)

There are no products matching the selection.

Brands